2011 Arctic Cat 350/425 ATV Service Manual, Page 105Get this manual
Measuring Connecting Rod (Big End Side-to-Side) 1Push the lower end of the connecting rod to one side of the crankshaft journal2Using feeler gauge, measure the gap between the connecting rod and crankshaft journal Measuring Crankshaft (Web-to-Web) 1Using calipers, measure the distance from the outside edge of one web to the outside edge of the other web
ATV-1017 CC289D
3Acceptable gap range must be within specificationsMeasuring Crankshaft (Runout) 1Place the crankshaft on set of blocks2Mount dial indicator and base on the surface platePosition the indicator contact at point of the crankshaft
2Acceptable width range must be within specificationsCOUNTERSHAFT
CAUTION
When disassembling the countershaft, care must be taken to note the direction each major component (dog, gear) facesIf major component is installed facing the wrong direction, transmission damage may occur andor the transmission will malfunctionIn either case, complete disassembly and assembly will be required