2011 Arctic Cat 150 ATV Service Manual, Page 33Get this manual

2011 Arctic Cat 150 ATV Service Manual, Page 33

6Install the centrifugal clutch housing and clutch collar; then secure with the flange nut (coated with red Loctite #271) and tighten to 40 ft-lb KM262

4Place the fixed drive face into position on the crankshaft and engage the splines making sure the splines extend beyond the pulley face hub

7Install the alignment pins and new gasket on the crankcase; then install the CVT cover and secure with the cap screwsTighten to ft-lb
Right-Side Components

Back to 2011 Arctic Cat 150 ATV Service Manual