2011 Arctic Cat 150 ATV Service Manual, Page 31Get this manual

2011 Arctic Cat 150 ATV Service Manual, Page 31

6Measure the fixed driven face hub outside diameter using calipersThe minimum service limit is 33.94 mm KM382A

4Inspect the pins and bushings for wear, flat spots, looseness, or cracking; then measure the inside diameter of the movable driven face bushingMaximum allowable service limit is 34.06 mm

7Measure the thickness of the centrifugal clutch shoe liningThe minimum service limit for the lining is 2.0 mmNOTE: If any shoe lining is below the service limit, the complete set must be replaced
Assembling

Back to 2011 Arctic Cat 150 ATV Service Manual