2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 219Get this manual
CLEANING AND INSPECTING
REMOVING 1Remove the seats and center console2Remove twelve cap screws and two self-tapping screws securing the floor to the frame3While pulling forward on the upper-rear of the floor, lift the rear part of the floor above the seat lock studNOTE: To aid in removing, insert small wood block to hold in position
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
1Clean the floor with soap and water2Inspect the floor for cracks or holesINSTALLING 1Place the front of the floor into position in the vehicle first; then lower the rear and push past the seat lock studs2Secure the floor with twelve cap screws and two self-tappings screws3Install the center console and seats making sure the seats lock securely into position