2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 218Get this manual
2Loosen but do not remove the four cap screws and flange nuts securing the hood hinge to the frame; then lower the hood
3Connect the four headlight connectors; then secure the wires with two new nylon ties
PR332B PR332A
3Finish removing the cap screws and flange nuts (from step 2); then remove the hood assemblyCLEANING AND INSPECTING
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
Fenders
REMOVING Remove three torx-head screws securing each fender to the frameAccount for stiffener bracket on the front fenders