2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 200Get this manual
4Remove the separator tool from the vise and install the universal joint, bearing cups, and movable yoke into the fixed yoke using the same procedure as steps 2-3 except the vise cannot be used 5Check that the universal joint can be flexed freely without binding; then apply multi-purpose grease to the splines and install the propeller shaft noting the match marks made prior to removing
Troubleshooting
Problem: Power not transmitted from engine to wheels Condition
1Rear axle shaft serration wornbroken
1Replace shaft
Problem: Power not transmitted from engine to either front wheel Condition