2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 199Get this manual
6Install the separator tool on the opposite side of the yoke to push the second bearing cup from the yoke; then remove the tool and separate the universal joint7Secure the separator tool in vise and repeat steps 4-6 to remove the bearing cups from the movable yoke PR367C
INSTALLING 1Remove the bearing cups from the universal joint; then insert the joint into the yoke and install one bearing cup on the jointPR375
CAUTION
Care must be taken when installing bearing cups that the needle bearings stay in place or severe damage to the universal joint will occur
INSPECTING 1Inspect the yoke bores for damage or signs of bearing cup loosenessIf bearing cups are loose, the yoke must be replaced