2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 198Get this manual
8Fill the reservoir; then bleed the brake system (see Section 2) ! WARNING
Never use brake fluid from an open container or reuse brake fluidMoisture-contaminated brake fluid could cause vapor build-up (expansion) during hard braking resulting in greatly increased stopping distance or loss of control leading to injury or death
9Install the wheelTighten to 45 ft-lb10Remove the vehicle from the support stand and verify brake operationPR120A
Universal Joints
REMOVING
NOTE: The four universal joints can be accessed by removing the belly panelTo remove the belly panel, see Belly Panel in Section 8
1Support the vehicle on suitable jack stands elevated high enough to allow working from the underside of the vehicle2To aid in installing, match mark drive-line components prior to removing