2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 197Get this manual
5Making sure brake fluid does not contact the brake pads, compress the caliper holder toward the caliper and install the inner brake pad; then install the outer pad
CAUTION
If brake pads become contaminated with brake fluid, they must be thoroughly cleaned with brake cleaning solvent or replaced with new padsFailure to do so will result in reduced braking and premature brake pad failurePR712
3Apply high-temperature silicone grease (supplied with the O-ring kit) to the inside of the caliper holder bores and O-rings; then install the four O-rings into the caliper