2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 195Get this manual
CAUTION Brake fluid is highly corrosiveDo not spill brake fluid on any surface of the vehicle and do not reuse brake fluid
NOTE: Whenever brake components are removed, disassembled, or repaired where brake fluid is exposed to air, drain all fluid and replace with new DOT brake fluid from an unopened containerBrake fluid readily absorbs moisture from the air significantly lowering the boiling pointThis increases the chance of vapor lock reducing braking power and increasing stopping distance
6Install the wheel and tighten to 45 ft-lb7Remove the vehicle from the support stand
3Remove the brake hose from the caliper and close the bleed screw; then remove the caliper4Compress the caliper holder against the caliper (opposite the O-ring side) and remove the outer brake pad; then remove the inner brake padNOTE: If brake pads are to be returned to service, do not allow brake fluid to contaminate them