2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 147Get this manual
5Remove the two shoulder bolts and nuts securing the radiator to the frame; then disconnect the upper and lower coolant hoses
2Connect the upper and lower coolant hoses to the radiator and secure with the appropriate hose clamps; then connect the cooling fan wire connector to the main harness
6Lift the radiator assembly from the vehicleAccount for two upper and two lower rubber mounting grommetsCLEANING AND INSPECTING
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
3Open the high-point bleed screw on the upper coolant pipe to allow trapped air to escapeTighten securely after filling4Pour the recommended coolant into the radiator and secure the radiator cap5Place the storage box into position and using smooth, flat pry-bar, pry the center of the box past the dash mount; then secure with the appropriate fasteners