2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 140Get this manual
5Install the air filter assembly and secure with the existing hardware; then connect the IAT sensor and crankcase breather hose6Install the center console and seats making sure the seats lock securely in place Electronic Fuel Injection
6Remove the screw securing the throttle actuator cover to the throttle body; then remove the cover7Remove the throttle cable from the actuator arm8Loosen the outer jam nut securing the throttle cable to the throttle body; then route the cable out of the way9Remove the electrical connectors from the throttle body components10Remove the throttle body assembly from the intake pipe
! WARNING
Whenever the gasline hoses are removed (other than for pressure testing), the battery must be disconnected to prevent inadvertent activation of the electronic fuel pump
! WARNING