2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 139Get this manual
FuelLubrication Cooling NOTE: Arctic Cat recommends the use of new gaskets, lock nuts, and seals and lubricating all internal components when servicing the enginetransmissionNOTE: Some photographs and illustrations used in this section are used for clarity purposes only and are not designed to depict actual conditionsNOTE: Critical torque specifications are located in Section 1
4Verify that the battery is sufficiently charged to crank the engine over at normal speed5Check the air filter housing and air filter for contaminationClean or replace as necessary (see Section 2)REMOVING THROTTLE BODY 1Turn the ignition switch to the OFF position; then remove the ignition switch key
! WARNING
Do not turn the ignition switch to the ON position with the hoses removedGasoline will be pumped by the electric fuel pump causing safety hazard
SPECIAL TOOLS number of special tools must be available to the technician when performing service procedures in this sectionRefer to the current Special Tools Catalog for the appropriate tool descriptionDescription