2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 137Get this manual
26Connect the negative battery cable and install the battery hold-down27Pour the recommended amount of oil into the enginetransmission28Remove the coolant bleed screw from the upper coolant pipe near the thermostat; then pour the correct mixture of coolant into the radiatorWhen coolant with no air bubbles flows from the bleed hole, install the screw and tighten securely PR594A
25Install nylon cable ties at all locations marked prior to removing engine; then check for correct routing of all wiring, hoses, and cablesPR672A