2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 132Get this manual
2Carefully lower the enginetransmission into position between the engine mounting tabs being careful to keep all cables, wires, and hoses clear; then install the longer, front through-bolt with flat washer GZ447
10Install the oil screen; then apply thin bead of silicone sealant to the oil strainer cap and secure with the cap screwsTighten to ft-lb
AT THIS POINT
After completing center crankcase components, proceed to Installing Right-Side Components, to Installing Left-Side Components, and to Installing Top-Side Components