2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 130Get this manual
9Carefully place the lower crankcase cover onto the joined crankcase halves; then secure with the cap screwsTighten the mm cap screws to ft-lb and the mm cap screws to 20 ft-lb
2Coat both sides with motor oil; then install the spacer washer on the crankshaft with the radius directed toward the crankshaft
GZ341 GZ321
10Install the oil screen; then apply thin bead of silicone sealant to the oil strainer cap and secure with the cap screwsTighten to ft-lb
3Install the two alignment pins; then apply thin bead of silicone sealant to the crankcase mating surface