2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 129Get this manual
6Install the locating ring in the crankcase assembly; then install the secondary driven shaft assembly and secondary drive assembly making sure the locating ring and bearing engage correctly GZ345B
4Carefully join the crankcase halves by placing the left-side crankcase onto the assembled right sideSecure with the cap screws (eight left side and one right side)
5Tighten the cap screws to ft-lb using the pattern shown and turning the shafts frequently to ensure there is no bindingNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs