2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 126Get this manual
Assembling Crankcase Half (GenII)
1Install the oil pump gerotor assembly and oil pump cover in the crankcase and secure with two cap screwsCoat the threads with blue Loctite #243 and tighten securely to ft-lbGZ280A
GZ305 GZ336
9Engage the shift forks into the gear shift shaft and push the shift fork shaft into the crankcase
2Install flat washer, drive pin, and drive gear onto the oil pump shaft; then secure with snap ring (flat-side away from the gear)
AT THIS POINT
Proper transmission shifting should be verified by turning the gear shift shaft to select High, Low, Neutral, and Reverse while rotating the input shaft and observing the countershaft rotation