2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 120Get this manual
2Noting the reference dots on the gerotor set, separate the inner rotor from the outer rotor and with the reference dot directed toward the oil pump cover, place the rotor on the shaft; then install the drive pin and push the shaft into the rotor
4Place new O-ring seal on the outside of the oil pump coverThe oil pump assembly is now ready for assembly into the crankcase
GZ362 GZ356
CRANKSHAFT ASSEMBLY
NOTE: The crankshaft and connecting rod is non-serviceable assemblyIf any component is out of specification, the assembly must be replaced