2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 116Get this manual
4Remove the snap ring securing the oil pump driven gear (D) to the oil pump driveshaft; then remove the gearAccount for drive pin and washer
7Remove the driveshaft (G); then remove the countershaft assembly (with shift forks) (H)Account for two flat washers on the countershaft
GZ280B GZ463B
5Remove the shift fork shaft (E); then remove the gear shift shaft assembly (F)Account for three flat washers
8Remove the reverse idler gear (I), shaft bushing, and two washers