2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 115Get this manual
7Remove the driveshaft (G); then remove the countershaft assembly (with shift forks) (H)Account for three flat washers on the countershaft
NOTE: To aid in installing, it is recommended that the assemblies are kept together and IN ORDER
1Support the right-side crankcase assembly on suitable support blocks; then carefully remove the crankshaft assembly (A) from the crankcase
8Remove the reverse idler gear (I), shaft bushing, and two washersGZ298
2Remove the snap ring securing the water pump drive idler (B) to the idler shaft; then remove the drive idler