2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 110Get this manual
12Place the V-belt into position on the driven pulley and over the front shaft
9Place the driven pulley assembly into position and secure with the nut (coated with red Loctite #271)Tighten to 80 ft-lb
NOTE: The arrows on the V-belt should point forward
13Pinch the V-belt together near its center and slide the spacer and movable drive face onto the shaftSecure the drive face with flat washer and nut (threads coated with red Loctite #271)Tighten the nut to 165 ft-lb