2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 109Get this manual
6Install the one-way clutch onto the clutch shoe assemblyGZ240
2Install the clutch shoe assembly and secure with the flange nut (threads coated with red Loctite #271)Tighten to 221 ft-lb
CAUTION
When installed correctly, the green alignment dot (or the word OUTSIDE) on the one-way clutch is visible
7Place the clutch coverclutch housing assembly into position on the crankcase; then secure with the cap screwsTighten in crisscross pattern to ft-lb