2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 107Get this manual
INSPECTING CENTRIFUGAL CLUTCH SHOE 1Inspect the clutch shoes for uneven wear, chips, cracks, or discolorationIf any shoe is damaged, replace the complete set2Inspect the clutch shoes for wear or damageIf any shoe is worn to the bottom of the groove, replace the complete set CAUTION
Always replace the clutch shoes as complete set or severe imbalance could occur
NOTE: Account for and inspect the clutch housing seal
10Remove the two cap screws securing the gear shift position switch; then remove the switchAccount for two contact pins and two springsATV1014
INSPECTING CLUTCH HOUSING 1Inspect the clutch housing for burns, grooving, cracks, or uneven wearCD997
11Remove the nut (left-hand threads) securing the clutch shoe assembly
2If the housing is damaged in any way, the housing must be replacedINSPECTING PRIMARY ONE-WAY DRIVE 1Insert the drive into the clutch housing2Rotate the inner race by hand and verify the inner race rotates only one direction3If the inner race is locked in place or rotates both directions, the drive assembly must be replacedDRIVEN PULLEY ASSEMBLY