2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 102Get this manual
10Remove the cap screw securing the shift cam plate to the shift cam shaft and remove the shift cam plate; then remove the shift shaftAccount for washer
12Remove the cap screws securing the oil filler cover to the crankcase; then remove the coverAccount for an O-ring
GZ250 GZ234B
11Remove the cap screws securing the speed sensor housing to the crankcase and remove the housing assembly; then remove the snap ring securing the speed sensor trigger to the shaft and remove the trigger using suitable "two-jawed" pullerAccount for gasket