2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 98Get this manual
26Place the C-rings into position in their grooves in the cylinder heads
NOTE: The adjuster shaft will be drawn into the tensioner as the adjuster screw is rotated clockwiseThe adjuster shaft tension will be released in step 30
29Place the chain tensioner adjuster assembly and gasket into position on the cylinder and secure with the two cap screws
27Install the cylinder head plugs in the cylinder heads with the open end facing downward and toward the inside
CAUTION
The open end of the plug must be positioned downwardCD469