2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 96Get this manual
17Keeping tension on the opposite cam chain, rotate the crankshaft until the second cap screw securing the sprocket to the camshaft can be installed; then install the cap screw (threads coated with red Loctite #271) and tighten to 11 ft-lbBend the tab to secure the cap screw
20With the cam lobes directed down (toward the piston), maneuver the camshaftsprocket assembly through the chain and towards its seating position; then loop the chain over the sprocketNOTE: Note the position of the alignment marks on the end of the camshaftThey must be parallel with the valve cover mating surfaceIf rotating the camshaft is necessary for alignment, do not allow the chain and sprocket to rotate and be sure the cam lobes end up in the down position
CAUTION
Failure to keep tension on any loose cam chain may cause severe engine damage