2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 85Get this manual
CCylinders DPistons NOTE: Steps 1-10 in the preceding sub-section must precede this procedure
11Remove the cap screws securing the water hose union to the cylinder; then remove the union from the cylinderAccount for an O-ring
12Remove the two nuts securing the cylinder to the crankcaseGZ144
AT THIS POINT
To service cylinder, see Servicing Top-Side Components sub-section
CAUTION
When removing the cylinder, be sure to support the piston to prevent damage to the crankcase and piston
14Using an awl, remove one piston-pin circlipGZ141A
GZ145 GZ160A