2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 82Get this manual
28Using suitable engine hoist, remove the weight from the through-bolt; then remove the boltsAccount for flat washer on each bolt and noting the front bolt is longer than the rear29Lift the enginetransmission enough to clear the engine mounting tabs on the frame; then remove the assembly from the right side of the vehicle GZ027
Top-Side Components
NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
NOTE: Timing marks on the rotorflywheel are stamped with an "F" (front cylinder) and "R" (rear cylinder) adjacent to the mark
AT THIS POINT
To service any one specific component, only limited disassembly of components may be necessaryNote the AT THIS POINT information in each sub-section