2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 81Get this manual

NOTE: The grafoil gasket may remain in the cylinder head 24Remove the cap screws securing the rear exhaust pipe to the cylinder head and remove the exhaust pipeAccount for grafoil gasket

27Remove the lock nuts from the engine through-bolts; then attach lifting chain to the enginetransmission

NOTE: The grafoil gasket may remain in the cylinder head
25Mark the components on the front driveshaft; then remove the three cap screws securing the driveshaft to the front differentialSlide the spline boot forward and remove the driveshaft from the output yokePR630

• ATV
• Jet Ski
• Outboard Motors
• Personal Watercraft
• Snowmobiles
• Stern Drives