2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 79Get this manual
15Remove four sheet metal screws securing the air filter mounting bracket to the frame; then loosen the intake boot clamp and remove the air filter assembly PR606A
18Remove the upper radiator hose from the thermostat housing; then move the coolant pipe to the left side of the vehiclePR603A
16Disconnect the engineharness ground; then disconnect the starter cable from the starter
19Remove the sheet metal screws securing the constant variable transmission (CVT) cooling duct to the frame; then loosen the hose clamps and remove the duct from the front elbow and CVT boot