2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 78Get this manual
CAUTION
The gear shift position switch wires are secured to the frame with nylon tie connectorThis must be removed prior to removing the enginetransmission or harness damage will occur
13Remove the E-clip from the transmission shift arm; then remove the shifter cable mounting bracket from the crankcase and move the shift support assembly and cable to right side of the vehicle
11Remove four mounting cap screws securing the shift support assembly to the frame; then remove the cap screw securing the upper coolant pipe support clamp to the shift support
NOTE: The parking brake cable does not need to be disconnected