2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 75Get this manual
10From the right-side, connect the speed sensor connector, fuel level sensor connector, and temperature sensor lead; then install the spark plug cap 11Install the throttle body and tighten the intake boot clamp securely; then connect the gasline hose, vacuum line, and throttle cable
12Place the air filter assembly into position and secure with the self-tapping screws; then connect the intake boot to the carburetorthrottle body and the inlet housing boot to the air filter housingTighten the clamps securely13Place the shifter assembly into position and secure with the four machine screwsTighten securely14Connect the shift cable to the shift arm; then secure with the E-clipNOTE: Before operating vehicle, check and adjust shift cable as required (see Section 2)PR130A