2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 74Get this manual
CAUTION
The drive-line yokes must be aligned (timed) or damage will occur to the universal joints and gears
8Connect the lower coolant hose to the water pump housing; then connect the upper coolant hose to the thermostat housingTighten the hose clamps securely9Install the starter wire on the starter and tighten the nut securely; then connect the alternator connector and gear position switch
5Install the cap screws securing the drive couplers to the drive flanges and tighten to 40 ft-lb