2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 66Get this manual
Disassembling Crankcase Half NOTE: For steps 1-7, refer to illustration CC821B
3Remove the shift shaft (H); then remove the two forks taking note of the direction of the tabs on the forks for assembling purposes4Remove the gear shift shaft (G) noting the location of the two holes on the end of the shaftAccount for two washersKEY ASecondary Driven Shaft Assembly BCrank Balancer Gear CCrankshaft Gear DCountershaft Assembly EFGHDriveshaft Reverse Idler Gear Assembly Gear Shift Shaft Shift Shaft with Forks CC821B
NOTE: To aid in installing, it is recommended that the assemblies are kept together and IN ORDER
1Remove the secondary driven shaft assembly (A) noting the location of the bearing locating pinsAccount for the bearing C-ringPR380A