2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 65Get this manual
Center Crankcase Components NOTE: This procedure cannot be done with the enginetransmission in the frameComplete Removing procedures for Top-Side, Left-Side, and Right-Side must precede this procedureNOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
Separating Crankcase Halves
1Remove the left-side cap screws securing the crankcase halvesNote the location of the different-lengthed cap screws2Remove the right-side cap screws securing the crankcase halvesNote the location of the different-lengthed cap screws3Using the Crankcase SeparatorCrankshaft Remover and tapping lightly with rubber mallet, separate the crankcase halvesAccount for four alignment pinsNOTE: To keep the shaftgear assemblies intact for identification, tap the shafts toward the right-side crankcase half when separating the halves