2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 63Get this manual
5Grease the driven gear pin and insert it into the oil pump shaft; then install the driven gear (noting the direction of the sides of the gear from removing)Secure with snap ring
7Install the clutch cover alignment pins into the crankcase, apply oil to the cover gasket, and install the gasket onto the crankcase8Install the one-way clutch onto the clutch shoe assembly
CD985A PR399A
CAUTION
When installed correctly, the green dot (or the word OUTSIDE) on the one-way clutch is visible