2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 59Get this manual
4Remove the fixed drive face and V-belt5Using an impact driver, remove the cap screws securing the air intake plate; then remove the plate cushion KEY AOil Pump Driven Gear BOil Pump Drive Gear CClutch Shoe Assembly
DOne-Way Clutch (Green Dot MUST Show) EFinal Drive Carrier Bearing Housing CC829C
6Remove the cap screws securing the clutch coverNote the location of the different-lengthed cap screws for installing purposesUsing rubber mallet, carefully remove the coverAccount for two alignment pins
7Remove the one-way clutch (D) from the clutch housingNote the location of the green dot (or the word OUTSIDE) for installing purposes8Using hydraulic press, remove the clutch housing assembly from the clutch coverAccount for the left fixed drive spacer and an O-ring inside the fixed drive spacer