2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 56Get this manual
5Install the shift cam plate onto the shift cam shaft; then coat the cap screw threads with red Loctite #271 and tighten securely CD139
4In order on the crankshaft, install washer, ring gear, key, and the magneto rotorSecure with the nut (threads coated with red Loctite #271)Tighten to 105 ft-lb
6Install the shift cam stopper, spring, and two washers; then coat the threads on the mounting stud with red Loctite #271 and install the nutTighten securely