2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 55Get this manual
15Remove the gear shift cam plate; then remove the shift cam stopper and cam stopper springAccount for two washers CD949
NOTE: The sharp side of the snap ring should be facing outwardPR434A
Installing Right-Side Components
NOTE: Plug the oil passage in the crankcase housing prior to installing the drive geardriven gear assembly to prevent loss of an alignment pin
2Install the water pump drive gear drive pin and the drive gear (with the flat side of the gear facing outward as noted in removing); then secure with the snap ring
1Install the water pump driven gear alignment pin and the driven gear (with the beveled side of the gear facing outward as noted in removing); then secure with the snap ringCD946A