2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 54Get this manual
12Remove the snap ring securing the water pump drive gear; then remove the gear noting the direction of the sides of the gear for installing purposesAccount for the drive gear alignment pin CD939A
13Remove the snap ring securing the water pump driven gear; then remove the gear noting the direction of the sides of the gear for installing purposesAccount for the driven gear alignment pin
AT THIS POINT
To service the magneto assembly, see Section 5
11Remove the two starter gears from the crankcase noting the direction of the beveled side of the gears for installing purposes; then remove the two starter gear shaftsCD952A