2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 45Get this manual
3Place the cylinder head on the surface plate covered with #400 grit wet-or-dry sandpaperUsing light pressure, move the cylinder head in figure eight motionInspect the sealing surface for any indication of high spotsA high spot can be noted by bright metallic finishCorrect any high spots before assembly by continuing to move the cylinder head in figure eight motion until uniform bright metallic finish is attained 3Place the cylinder on the surface plate covered with #400 grit wet-or-dry sandpaperUsing light pressure, move the cylinder in figure eight motionInspect the sealing surface for any indication of high spotsA high spot can be noted by bright metallic finishCorrect any high spots before assembly by continuing to move the cylinder in figure eight motion until uniform bright metallic finish is attained
CAUTION
Water or parts-cleaning solvent must be used in conjunction with the wet-or-dry sandpaper or damage to the sealing surface may result
CAUTION
Water or parts-cleaning solvent must be used in conjunction with the wet-or-dry sandpaper or damage to the sealing surface may resultCC128D CC129D