2010 Arctic Cat Prowler XT/XTX/XTZ ATV Service Manual, Page 23Get this manual
4Remove the two lock nuts (A) from the brake pad anchor bolts; then remove the brake pads (B)Account for two springs and spacers (C)
7Install the cap screws securing the cable support to the caliper and tighten securely
5Install the new brake pads and anchor bolts with springs and spacers; then secure with new lock nuts
8Connect the brake cable to the actuator arm with the pin and flat washer and secure with the cotter pin; then adjust the parking brake (see ADJUSTING in this sub-section)