2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 80Get this manual

2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 80

CAUTION Do not tighten the cap screws beyond the 29 ft-lb specification or the shock eyelet or mount WILL be damaged
6Remove the rubber spindle pin boot; then remove the cotter pin and flanged castle nut from the spindle pinLower the steering knuckle assembly from the A-arm
3Remove the ATV from the support stand
REMOVING 1Secure the ATV on support stand to elevate the front wheel; then remove the wheel
! WARNING
Make sure the ATV is solidly supported on the support stand to avoid injury

7Remove the cap screw and self-locking nut securing the shock absorber to the A-arm

Back to 2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual