2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 76Get this manual

2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 76


4Repeat procedure for the other hubINSTALLING HUB 1Lightly lubricate the seals with bearing grease; then install the hub assembly2Install the outer spacer, washer, and castle nutTighten the castle nut to 45 ft-lb; then install new cotter pin
3Install wheelTighten the four cap screws to 30 ft-lb4Repeat procedure for other hub assembly
Brake Systems
For information regarding the brake systems, see Section 2MD2388

Troubleshooting
Problem: Power not transmitted from engine to wheels Condition Remedy
12345Drive chain wornbroken Countershaft sprocket wornbroken Rear sprocket wornbroken Chain slipped off sprockets Master link wornbrokenmissing 12345Replace chain Replace countershaft sprocket Replace rear sprocket Replaceadjust drive chain Replace master link

Back to 2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual