2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 53Get this manual
CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
! WARNING
When drying components with compressed air, always wear safety glasses
CAUTION
DO NOT place any non-metallic components in parts-cleaning solvent because damage or deterioration will result
6Remove the jet holder; then remove the main jet from the jet holder
1Place all metallic components in wire basket and submerge in carburetor cleaner2Soak for 30 minutes; then rinse with fresh parts-cleaning solvent3Wash all non-metallic components with soap and waterRinse thoroughly4Dry all components with compressed air only making sure all holes, orifices, and channels are unobstructed5Inspect the carburetor body for cracks, nicks, stripped threads, and any other imperfections in the casting