2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 46Get this manual
6Install the statortrigger coil assembly and secure with four cap screwsTighten securely
2Install the two front engine mounting brackets on the frame and tighten the cap screws securely; then install the two front through-boltsDo not tighten at this time
7Install the rotor flywheel making sure the crankshaft and flywheel bore are clean and free of any oil; then with the key in place, secure with the flywheel nut coated with red Loctite #271Tighten to 30 ft-lb