2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 39Get this manual

2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 39

7Remove the shift shaft (E); then remove the shift camdetent assembly (F)8Using plastic mallet, drive the input driveshaft (D) and bearing from the transmission case YT081

3Remove the reverse gear snap ring and splined washer; then remove the reverse gear and thrust washerYT037

FMAIN SHAFT
NOTE: If not absolutely necessary to replace components, do not disassemble the main shaft
To disassemble the main shaft components, use the following procedure1Remove the forward gear spacer and thrust washer; then remove the forward gearAccount for the forward gear bushing and washerYT080

Back to 2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual