2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 31Get this manual

2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 31


5Place new gasket into position on the cylinderPlace the alignment pins into position; then place the head assembly into position on the cylinder making sure the cam chain is routed through the chain cavity
7Make sure the crankshaft is positioned at TDC; then install the camshaft with the single large reference hole (A) directed up and the two small timing holes (B) parallel to the top of the cylinder head
CAUTION

Back to 2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual