2010 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 14Get this manual
2Loosen both jam nuts on the right-hand (front) brake leverTurn both cable adjusters counterclockwise until both front wheels do not spin freely Removing Rear Brake Pads 1Remove the two cap screws securing the brake caliper to the axle housing; then lift the caliper off the disc
3Turn both cable adjusters in 14 turn increments (clockwise) until the wheels spin with very slight amount of drag4Lower ATV; then push it forward and compress the brake lever5If the front wheels lock evenly, adjustment is correct6If the front wheels do not lock evenly, additional adjustment is necessary7Once proper adjustment is obtained, tighten the jam nutsMEASURINGREPLACING BRAKE SHOESPADS Removing Front Brake Shoes 1Support the ATV on support stand2Remove both front wheels and account for the cap screws3Remove the cotter pins, castle nuts, and washers; then remove the brake drumswheel hubs4Loosen the brake shoe return spring; then remove the brake shoes